WhatsApp：+86 19066591275
Call us 24/7+86 19066591275
Call us 24/7+86 19066591275

News

Home / News (Page 2)
2025-07-07 BY
IN Company News

EATON PL9-C4-2-DC Circuit Breaker

EATON PL9-C4-2-DC Circuit Breaker

Product manual:

EATON PL9-C4-2-DC miniature circuit breaker is a modular miniature circuit breaker designed specifically for direct current (DC) applications,
Widely used in DC distribution systems, such as industrial automation, power systems, communication equipment, and new energy systems.
Here are its detailed product information and application areas:

1、 Basic Product Information
Product Model: EATON PL9-C4-2-DC

Type: Miniature Circuit Breaker (MCB)

Current rating: 4A

Number of poles: 2 poles (for bipolar DC applications)

Voltage level: typically supports up to 220V DC (per pole) or 440V DC (when connected in series with 2 poles)

Release curve: C-type (C Curve, suitable for medium inductive loads)

Installation method: DIN rail installation

Standard certification: Complies with IEC/EN 60947-2 or IEC/EN 60898 (DC version)

2、 Product Features
Specially designed for DC systems: Unlike ordinary AC MCBs, it is specifically designed for DC voltage breaking and has strong arc extinguishing capabilities.

Bipolar protection: Disconnect the positive and negative poles or two positive poles respectively, suitable for different DC topologies.

C-type tripping characteristic: suitable for slight inductive loads such as small DC motors, relay circuits, etc.

High breaking capacity: It has good short-circuit protection capability, commonly 6kA.

Compact structure: suitable for high-density installation in limited space.

3、 Typical application areas
Industrial automation system

PLC control cabinet, sensor power supply circuit, DC relay control circuit

DC drive device, solenoid valve, and branch protection for small loads of motors

Solar Energy and Energy Storage System (Photovoltaic DC System)

Used for photovoltaic combiner boxes, DC distribution cabinets, and energy storage battery pack circuits

Provide branch protection and rapid isolation for DC buses or subsystems

Communication base station and data center

Circuit protection of communication equipment DC power supply system (such as -48V DC)

Branch isolation open circuit between UPS backend or battery pack

Transportation and Rail Transit Equipment

Power supply protection for electric traction system, DC lighting, and electrical control equipment

Suitable for DC power supply scenarios such as subways and trams

DC charging system (EV field)

DC side protection for electric vehicle charging stations, particularly suitable for low-power branches or control circuits

Input/output protection of power module

Product details picture:

ABB PM825 3BSC970121R1 CPU Processor Controller Module, Precision Control for Industry 4.0

ABB RC527 Fan Unit – Industrial Cooling Solution, ABB RC527 3BSE008154R1
2025-07-07 BY
IN Company News

EATON PL9-C2-2 Miniature Circuit Breaker

EATON PL9-C2-2 Miniature Circuit Breaker

Product manual:

EATON PL9-C2-2 miniature circuit breaker is a modular circuit breaker produced by Eaton Corporation for use in low-voltage distribution systems,
Has high reliability and good overload and short-circuit protection performance. The following is an overview of its products and an introduction to its application areas:

1、 Basic Product Information
Model: PL9-C2-2

Type: Miniature Circuit Breaker (MCB)

Number of poles: 2 poles (bipolar)

Rated current: 2 A

Release curve: C-type (C Curve, suitable for conventional resistive and mild inductive loads)

Rated voltage: generally 230/400V AC (depending on regional standards)

Breaking capacity: usually 6kA (to be confirmed with specific series)

Installation method: DIN rail installation

Compliant with standard: IEC/EN 60898-1

2、 Product Features
Provide bipolar isolation protection, which can be used for simultaneous disconnection of dual line systems

Quick disconnect mechanism, which can quickly cut off the power supply in case of overcurrent or short circuit

Compact size, suitable for standard electrical distribution boxes

C-type trip characteristic, suitable for electric motors, small transformers, and lighting loads

High mechanical and electrical lifespan, suitable for frequent operation

3、 Application Fields
Residential and commercial buildings

Used for branch protection of household circuits, such as lighting and socket circuits

Protect ordinary electrical equipment in buildings from overload and short circuit damage

Industrial control system

Circuit protection in small industrial equipment, control cabinets, and distributed systems

Distribution board and electrical control cabinet

As a branch circuit protection component in the control cabinet

Ensure safe isolation of downstream module equipment in the event of electrical failure

Telecommunications and IT room

Provide isolation and protection for power system branch lines to prevent equipment damage

Applied to sub protection circuits in UPS output branches and power distribution units

Product details picture:

ABB DX561 – High-Performance Motor Control Module

ABB IMHSS03: Industrial Motor Control Module
2025-07-07 BY
IN Company News

Abaco X10-14210201 605-A53842-002 Controller Module

Abaco X10-14210201 605-A53842-002 Controller Module

Product manual:

Abaco X10-14210201/605-A53842-002 controller module is a high-performance embedded processing module, mainly used in embedded systems with high reliability and real-time requirements, suitable for task calculation and system control in various harsh environments. Its main application areas are as follows:

Defense and Military Field

Used for command and control systems, radar signal processing, tactical communication systems

Mission control and data processing applied to ground, sea, and air platforms

Aerospace Systems

As the core module of aviation electronics, it participates in flight control and navigation systems

Applied to satellite communication, drone control, and avionics system integration

industrial automation control

Used for industrial robot control, visual recognition systems, and automated inspection platforms

Support factory level process control system, data collection and execution control

rail transit system

Applied to train control management system (TCMS), signal system and onboard control terminal

Support operation status monitoring, diagnostic analysis, and remote maintenance

Communication and Network Processing

Protocol processing and network edge computing in high-speed communication equipment

Can be integrated into a secure communication platform to achieve data encryption and real-time transmission

Medical and research equipment

Data calculation and control module applied in high-end medical imaging equipment

Support real-time data collection and analysis tasks in scientific research experimental systems

Product details picture:

GE IC600CB527 IC600CB527L – Advanced Control Module for Industrial Automation

ABB 3BHE030312R0101 – Advanced Control Board, Designed for Precision and Reliability
2025-06-26 BY
IN Company News

TRICONEX MP3101 main processor module

TRICONEX MP3101 main processor module

Product manual:

The TriconeX MP3101 is a triple redundant safety control system main processor module that serves as the central control unit of the entire Tricon system, responsible for processing I/O module data, executing user logic programs,

[Key Technical Parameters]
Project parameter description
Triple Modular Redundancy (TMR) in processor architecture
Redundant type with three independent CPU channels and three running status comparators
High speed parallel processing ensures low latency and high reliability response
User logic program supports IEC 61131-3 standard languages (LD, FBD, ST, SFC)
Multi level program and data storage with memory capacity (see user manual for details), supporting user applications and diagnostic storage
Software supports TriStation 1131 (for programming, simulation, configuration, diagnosis)
System synchronization supports main control synchronization between multiple MP3101 (for redundant control or system expansion)
The communication function communicates with all I/O modules and can be connected to DCS/SCADA and other systems through the communication module
Redundant support: The main processor module can be configured as primary or backup, with automatic switching to ensure continuous operation
Installation method: Insert into the standard rack slot of the Tricon system
Online hot swappable support (replacement during system operation without power outage)

Environmental adaptability
Working temperature range: 0-60 ° C

Storage temperature range: -40 to 85 ° C

Seismic and anti-interference capability: compliant with international standards for industrial electrical equipment

Humidity range: 5-95% (no condensation)

[System Application Features]
✅ Support fault self detection and fault tolerance mechanism: can automatically isolate the faulty CPU and continue system operation

✅ Provide SIL3 security level: meets IEC 61508 and ANSI/ISA 84 standards

Compatible with all Tricon series modules (including DI3301, AO series, CM communication module, etc.)

✅ Support online change of control logic: the system does not interrupt or abort

✅ Provide comprehensive system diagnosis, event recording, and timestamp recording functions

Product details picture:

Hima Himatrix F31 SPS D0171 Advanced Safety Control Module – Safety Innovation for Industrial Automation

SIEMENS 6FM1721-3AA10 – Advanced Positioning Module for Industrial Automation
2025-06-26 BY
IN Company News

TRICONEX DI3301 Digital Input Module

TRICONEX DI3301 Digital Input Module

Product manual:

TRICONEX DI3301 Digital Input Module

[Manufacturer]
Schneider Electric

[Module Function]

from the field and transmit them to the main processor (control unit) for logical judgment and safety interlock operations.

[Key Technical Parameters]
Project parameter description
32 input points (isolated separately for each channel)
Input type: dry contact or active input (DC signal)
Input voltage range 0-32 VDC
Triple redundant communication architecture (each input point is independently collected by three channels)
Module redundancy supports online hot plugging, triple redundancy support
The module diagnostic function supports real-time detection of open circuit, short circuit, self diagnosis, overvoltage, etc
Communicate with the main control and communicate with the Tricon main processor through the I/O bus
Installation method: Insert into Tricon rack (standard 16 slot system)
Module size standard Tricon module size

Environmental and reliability parameters
Working temperature: 0 ° C to+60 ° C

Storage temperature: -40 ° C to+85 ° C

Seismic resistance: meets industrial control standards

Electromagnetic Compatibility (EMC): Compliant with IEC/EN61000 series standards

Protection level: To be installed inside the control cabinet (IP20)

Product details picture:

AB 1783-BMS10CGA – MicroLogix Modular Control System

Allen-Bradley AB PanelView Plus 2711-T10G20, High-Performance Human Machine Interface
2025-06-26 BY
IN Company News

IC695CPE400-ABAB Advanced Control Processor

IC695CPE400-ABAB Advanced Control Processor

Product manual:

IC695CPE400-ABAB Advanced Control Processor (CPU Module)

[Manufacturer]
GE Intelligent Platforms (now owned by Emerson)

【 Series 】
PACSystems RX3i Series

[Functional positioning]
High performance CPU control module, suitable for medium to large automation control systems, integrating Ethernet communication and powerful logic processing capabilities.

Main technical specifications
Processor type: Dual core ARM Cortex-A9, with a clock speed of 800 MHz

User logic memory: 64 MB

Data memory: 64 MB

Flash memory: 64 MB (for program storage)

SD card support: Supports MicroSD cards for program, data backup, and logging purposes

Ethernet ports: 2 Gigabit RJ45 ports (supporting Modbus TCP/IP, SRTP, EGD, OPC-UA)

USB interface: 1 USB 2.0 (for debugging and firmware upgrade)

Software support: Proficy Machine Edition (PME), supports IEC 61131-3 programming languages (LD, ST, FBD, SFC, etc.)

Installation method: Insert into the RX3i series host rack

Power supply method: Powered by rack (+5V DC)

[Communication Protocol]
Modbus TCP/IP

SRTP (GE proprietary protocol)

EGD（Ethernet Global Data）

OPC-UA

SNMP (Network Management)

FTP (File Transfer)

[Work Environment]
Working temperature: 0-60 ° C

Storage temperature: -40~85 ° C

Relative humidity: 5-95%, no condensation

Product details picture:

HONEYWELL PLC 51303922-426 Dual Node Fan Assembly

Honeywell 51304668-100 Advanced Industrial Control Module for Enhanced Automation Solutions
2025-02-07 BY
IN Company News

Bently 3500/42M 135489-01 Transient Data Interface

Bently  Transient Data Interface

Product manual:

Product Features
High performance transient data capture
Support real-time collection and processing of transient vibration data.
Used to analyze the characteristics of the start-up, shutdown process, and sudden failures of mechanical equipment.
Multi channel input
Provide multiple monitoring channels to simultaneously capture transient signals from multiple points.
Supports multiple types of vibration sensors and data input.
High precision signal processing
Built in digital signal processor (DSP), supporting functions such as signal filtering and spectrum analysis.
Provide data processing and storage capabilities for subsequent analysis.
Alarm function
Equipped with dual level alarms (Alert and Danger), real-time monitoring of equipment status changes.
It can be linked with other 3500 modules to achieve protection and alarm functions.
Data Integration and Visualization
Can output captured data to the upper computer or monitoring system for in-depth analysis.
Support integration with Bently Nevada System 1 software for trend analysis and event recording.
technical specifications
Number of monitoring channels: 4 independent channels, each channel can be configured separately.
Input type: Supports signal input such as vibration, displacement, velocity, acceleration, etc.
Signal processing: Built in digital signal processor for signal acquisition, filtering, and feature extraction.
Transient event recording: supports recording abnormal events that occur during startup, shutdown, or operation.3500/42M
Alarm mechanism:
Alert: Used to indicate abnormal trends.
Danger: Used to indicate serious abnormalities and trigger protective actions.
Output interface: Supports outputting data to SCADA or DCS systems through communication modules.
Power supply method: Powered by 3500 racks.
Environmental adaptability:
Working temperature:- 30 ° C to+65 ° C
Humidity range: 5% to 95% (without condensation).

Product details picture:

Bently Nevada 3500/42M – Proximitor*/Seismic Monitor

Bently Nevada 3500/42M-02 Proximitor/Seismic Monitor
2025-02-07 BY
IN Company News

Bently 3500/54 286566-01 overspeed detection module

Bently 3500/54 286566-01 overspeed detection module

Product manual:

Bently Nevada 3500/54 (286566-01) overspeed detection module
It is a monitoring and protection device designed specifically for industrial rotating machinery.
It is used for real-time monitoring of mechanical equipment’s overspeed, zero speed, and performance within the speed range,
And provide reliable alarm and protection functions, widely used in steam turbines, compressors, and other high-speed rotating equipment.
Product Overview
Attribute Details
Model 3500/54
Order number 286566-01
Equipment type: Overspeed Detection Module
Bently Nevada 3500 Series
Main functions include overspeed protection, zero speed detection, and multi speed segment monitoring
Installed in the 3500 frame as an independent protection module
Key features
Multi channel design:
Provide two monitoring channels, each working independently and supporting redundant or multi-point monitoring.
Real time alarm function:
Built in Alert and Danger alarm mechanisms ensure the safe operation of the device.
Support alarm relay output, used to trigger protective actions or notify the control system.
Compatible with multiple sensors:
Supports use with Bently Nevada’s eddy current probes, magnetic sensors, and optical sensors.
Modularity and Scalability:
As part of the 3500 series, it seamlessly integrates with other modules such as the 3500/22 communication module.
Support hot swapping, modules can be replaced without shutting down, making maintenance convenient.
technical parameter
Parameter details
Number of channels: 2 channels
Support sensor types such as eddy current probes, magneto resistive sensors, optical sensors, etc
Speed range 1 to 120000 RPM
Output signal warning and danger alarm output, which can trigger the protection system
Alarm delay configurable, typical value 0-60 seconds
The power supply voltage comes from the 3500 series frame
Operating temperature -30 ° C to+65 ° C
Storage temperature -40 ° C to+85 ° C
The protection level meets industrial standards, with high temperature resistance, dust resistance, and shock resistance

Product details picture:

Bently Nevada 3500/54M Position Monitor

Bentley Nevada 3500/54M Position Monitor – Advanced Industrial Automation Solution
2025-02-07 BY
IN Company News

Bently 3500/50 286566-02 tachometer module

Bently 3500/50 286566-02 tachometer module

Product manual:

Bently Nevada 3500/50 (286566-02) Tachometer Module
It is an important module in the Bently Nevada 3500 series used for monitoring the rotational speed of rotating machinery.
Product Overview
Attribute Details
Model 3500/50
Order number 286566-02
Equipment type Tachometer Module
Bently Nevada 3500 Series
Main functions: speed monitoring, overspeed protection, zero speed detection
Installed in the 3500 frame, it can be used as an independent module
Key features
High precision speed monitoring:
Capable of monitoring the actual rotational speed of rotating machinery and providing real-time data.
Supports a wide measurement range from 1 to 120000 revolutions per minute.
Multiple alarm functions:
Support alarms for zero speed, over speed, and near speed.
Alarm thresholds can be set to achieve flexible monitoring of operational status.
Dual channel design:
Provide two completely independent monitoring channels, suitable for redundant or multi-point monitoring needs.
Flexible input:
Supports various sensor inputs, such as magneto resistive sensors, eddy current probes, and optical sensors.
Supports multiple types of sensor output signals, including TTL and pulse.
technical parameter
Parameter details
Number of channels: 2 channels
Input signal types include TTL, eddy current probe, magneto resistive sensor, etc
Speed range 1 to 120000 RPM
The power supply voltage comes from the 3500 series rack
Interface communicates with 3500 display module and data acquisition module
Working environment temperature -30 ° C to+65 ° C
Storage environment temperature -40 ° C to+85 ° C
The protection level meets industrial standards and is suitable for harsh environments

Product details picture:

Bently Nevada 3500/50 28806202 – High-Precision Tachometer Module for Industrial Control

BENTLY 3500/50 286566-02 Module
2025-02-07 BY
IN Company News

Bently 3500/50 133442-01 Position Monitor Module

Bently  3500/50 133442-01 Position Monitor Module

Product manual:

Product Features
High precision position monitoring
Accurately measure and monitor the displacement and position changes of rotating components of equipment, such as shafts, rotors, turbines, etc.
It can detect potential issues such as offset, misalignment, and vibration, which helps to detect equipment abnormalities in a timely manner.
Compatible with multiple sensors
Supports multiple types of sensor inputs, including eddy current sensors, laser displacement sensors, etc.
Has strong flexibility and scalability, adapting to different measurement requirements and working environments.
Multi level alarm function
Provide multi-level alarms, including warning and danger levels, capable of triggering alarms when equipment deviates or experiences abnormal displacement.
Different alarm thresholds can be set to help identify and handle equipment abnormalities in a timely manner.
Real time data collection and processing
Built in high-performance digital signal processor (DSP) for real-time processing and optimization of input signals, ensuring data accuracy and reliability.
Support data output and recording, facilitating later analysis and monitoring of trends.
Integration and Scalability
Capable of integrating with other Bently Nevada 3500 series modules and supporting seamless connection between the mainframe and the system.
Capable of integrating with industrial automation systems such as SCADA and DCS, supporting remote monitoring, data transmission, and alarm processing.
technical specifications
Input channel: Supports multiple input channels, the specific number depends on the system configuration.
Sensor type: Supports various types of displacement and position sensors such as eddy current sensors and laser sensors.
Alarm function: It has multi-level alarm function and can alarm according to the set offset and position threshold.
Signal processing: Using digital signal processing technology to ensure the accuracy and stability of signal acquisition.
Working temperature range:- 30 ° C to+65 ° C.
Power supply method: Powered by a 3500 mainframe.
Size: Compatible with 3500 series mainframe and suitable for installation in standard racks.

Product details picture:

Bently Nevada 3500/50-04-01: Precision Measurement for Industrial Automation

Bently Nevada 3500/50 133442-01

Menu
Call us 24/7+86 19066591275

Search for products

Back to Top
Product has been added to your cart
phone: +86 19066591275
to whats
+8619066591275
email: abbdcs36@gmail.com